TempTest™ Plus Blue

Use in dishwashers, freezers or anywhere a waterproof thermocouple is useful. Stranded wire cable with PTFE insulation and a cylindrical cap sealed over the junction.

The High Temp Smokehouse Penetration Probe features a stainless overbraid to protect the cable. This probe is perfect for smoking meats, its 78" cable is small enough in diameter to be closed in a home kitchen oven door and has a 90° bend. It's also ideal for general purpose use. When used with our pot clip, it makes a good stovetop probe for candy or indoor deep frying.

This handheld probe with a 1/8" shaft and reduced 1/16" (1.5mm) needle tip gives you the exact same high speed probe stem as the Thermapen uses. It's the perfect combination of speed and durability. You get 3 second food or liquid readings. The reduced tip makes a small hole and is perfect for meats and general purpose kitchen use. Reference 103-159 for the straight cable model and 303-159 for the coiled version.

Penetration probe used by commercial smokehouses. The 78" cable is covered by a flexible stainless steel armor and has a wider temperature range. It will survive longer than other probes when stepped on, manhandled, kinked, slammed in doors or exposed to the higher temperatures to 662ºF. It should be protected from direct exposure to flames and should not be immersed past the stainless probe section. The armor is not easily closed in a regular home oven door, so choose a different probe for standard kitchen use. You can still break this probe if you try, but it is the toughest probe available.

With stainless steel overbraid, this probe is perfect for monitoring ambient air temperatures in high temp environments (e.g. fireboxes, grills and smokers). It is not designed for direct food measurements. Attach the probe to an oven rack or grill grate exactly where you need it. The probe cable is small enough in diameter to close in an indoor oven door, so it's ideal for general purpose use. Cable length: 78 in.

The High Temp Flexible Ceramic Fiber Insulated Probe is used in commercial ovens and furnaces. Good choice to monitor the ambient temperatures of fireboxes, kilns, grills, etc. However, it's not designed for direct food measurements.

This probe is great for very small samples and speedy response times (reads in only 2 seconds). The PTFE cable and sealed junction allow you to immerse the cable and probe in ovens or other cooking processes and can withstand oven temperatures so you can close the cable in an oven door. The Miniature Needle Probe is a great choice for Sous Vide cooking. Available in two lengths. The cable can be damaged by direct contact with flame or heating elements.

This 4" handheld probe with a 1/8" shaft and reduced 1/16" (1.5mm) needle tip gives you the exact same high speed probe stem as the Thermapen uses. It's the perfect combination of speed and durability. You get 3 second food or liquid readings. The reduced tip makes a small hole and is perfect for meats and general purpose kitchen use.

Available in different lengths and diameters. The larger diameters are more rigid while the smaller diameter (1/4") is faster. All have reduced-diameter tips to improve response. Perfect for long reaches, deep containers, pulp processing, ground-meat processing, silo-grain temperature, composting, asphalt plants and many other purposes.

The Crocodile Clip Oven Probe is used by commercial kitchens to calibrate and profile ovens and grills. A stainless steel overbraid protects the probe and a fiberglass inner sheath protects the 78" lead. The clip can be easily attached to an oven rack and allows you to place it right where you need it. Great for monitoring grill temps during roasting, searing or smoking.

Originally designed for measuring burgers, steaks and thin meat portions, this probe is often chosen for other purposes because it's diameter is smaller than our handheld needle probe and it's a bit quicker while leaving an even smaller hole. The 3.35" length allows you to reach the center of even a large burger when entering from the side, or it will reach the center of roasts for an extremely fast measurement. An optional detachable coiled or straight extension lead is also available.

This 5" general purpose probe is popular in the food industries and is a little more rugged than the Fast Response Probe. The 1/8" diameter shaft is swaged to a smaller diameter and given a very sharp tip for easy penetration in most semi-solids. Great for reaching over hot grills, into large ovens, rotisseries or deep pots; also suitable for liquids and air temperatures. It's very durable probe resists bending and breaking (for frozen foods consider heavier duty probes) and is recommended for hard daily use. Fairly quick response time takes only about 7 seconds to a complete reading. Includes coiled cable. Great for testing meats in rotisseries, ovens or barbecue applications.

Miniature, stainless steel needle probe is supplied with a PTFE cable. The needle probe is ideal for delicate foods. Response time is less than one second. Fully sealed up to the connector.

This probe is great for very small samples and speedy response times (reads in only 2 seconds). The PTFE cable and sealed junction allow you to immerse the cable and probe in ovens or other cooking processes and can withstand oven temperatures so you can close the cable in an oven door. The Miniature Needle Probe is a great choice for Sous Vide cooking. Available in two lengths. The cable can be damaged by direct contact with flame or heating elements.

This general purpose probe is popular in the food industries and is a little more rugged than the Fast Response Probe. The 1/8" diameter shaft is swaged to a smaller diameter and given a very sharp tip for easy penetration in most semi-solids.

This probe is great for very small samples and speedy response times (reads in only 2 seconds). The cable and probe can go in ovens or other cooking processes and can withstand high temperatures so you can close the cable in an oven door. The cable can be damaged by direct contact with flame or if temperatures exceed 500°F.

The High Temp Alligator Clip Oven Probe is used by commercial kitchens to calibrate and profile ovens. A stainless steel overbraid protects the probe and a fiberglass inner sheath protects the 120" lead. The clip can be easily attached to an oven rack and allows you to place it right where you need it. Great for temporary monitoring of oven temps during roasting or baking.

This 12" general purpose probe is popular in the food industries and is a little more rugged than the Fast Response Probe. The 1/8" diameter shaft is swaged to a smaller diameter and given a very sharp tip for easy penetration in most semi-solids. Great for reaching over hot grills, into large ovens, rotisseries or deep pots; also suitable for liquids and air temperatures. It's very durable probe resists bending and breaking (for frozen foods consider heavier duty probes) and is recommended for hard daily use. Fairly quick response time takes only about 7 seconds to a complete reading. Great for testing meats in rotisseries, ovens or barbecue applications.

The High Temp Wire Probe is a good low-cost high temp probe for ovens and backyard grills. It's protected with a fiberglass insulation, however, you should avoid using it over 660°F. Avoid direct immersion in liquids or direct contact with food. Available in multiple lengths.

PTFE insulated with exposed junction. Stranded wire with less than 0.1" overall diameter. General purpose.

The Low Cost Oven Cooking Probe is a simpler version of our Oven Cooking Probe. There is no handle, but the stainless steel probe is still swaged and pointed and you get a 78" PTFE cable. This probe is a good choice if you want a budget solution or want a lower cost replacement solution. PTFE cable can be closed in oven doors although you'll want to avoid flames or temperatures higher than 500°F. Longer cables available upon request.

Sharp penetration probe is mounted directly to an industry-standard miniature thermocouple plug. No cable included. Plug this probe directly into most thermocouple meters for a one-handed thermometer (meter/probe combination). Probe tip is swaged to a smaller diameter then sharpened for fast measurements and easy penetration. An optional detachable coiled or straight extension lead is also available.

Insulated wires with exposed junction. Easily taped, clamped or glued to surfaces, in holes. Wire dia: 0.01", 0.024" with insulation. Very fast air, gas or general purpose.

Rugged and durable design covers a very wide range. Used in many industries for high temperature metal surfaces.

These fast response surface probes have a bell-shaped housing with a thin, flat, stainless steel measuring disc, ideal for measuring surface temperatures. Temperature range for the sensor is from -58 (-50°C) to 500°F (260°C).

Extend the reach of your probe with this probe extension lead. Cable is straight and works with type K probes and meters. Features a plug on one end and socket on the other. Length is 118" (3 meters) from plug to socket.

A popular general purpose probe that will withstand a very wide temperature range. The shaft is mineral-insulated stainless steel that can be bent without adversely affecting performance. Use this probe for liquids and hot air or gases.

Perfect for long reaches, deep containers, pulp processing, ground-meat processing, silo-grain temperature, composting, asphalt plants and many other purposes. Extra sturdy shaft with reduced tip for faster response times.

This is the fastest and most accurate handheld surface probe we've seen. Readings generally take less than 5 seconds! The sensor is made from flat-spring ribbons of thermocouple material. Very popular in equipment servicing applications and in the plastics and packaging industries.

Available in different lengths and diameters. The larger diameters are more rigid while the smaller diameter (1/4") is faster. All have reduced-diameter tips to improve response. Perfect for long reaches, deep containers, pulp processing, ground-meat processing, silo-grain temperature, composting, asphalt plants and many other purposes.

Rugged and durable design covers a very wide range. This probe is great for hard to reach surfaces.

Very sharp, heavy-shafted stainless steel probe for penetration in meats, frozen and refrigerated foods. The T-handle makes insertion and removal very easy. This is a very tough and rugged probe with reasonably fast response time.

Available in different lengths and diameters. The larger diameters are more rigid while the smaller diameter (1/4") is faster. All have reduced-diameter tips to improve response. Perfect for long reaches, deep containers, pulp processing, ground-meat processing, silo-grain temperature, composting, asphalt plants and many other purposes.

This is the fastest and most accurate handheld surface probe we've seen. It has a right angle bend in the shaft to improve access where the surface is hard to reach. Readings generally take less than 5 seconds! The sensor is made from flat-spring ribbons of thermocouple material. Very popular in equipment servicing applications and in the plastics and packaging industries.

Add water protection to your type K meter with our waterproof pouch. Type K lead is sealed from water ingress so a probe can be connected while meter is kept dry inside pouch.

A popular general purpose probe that will withstand a very wide temperature range. The shaft is mineral-insulated stainless steel that can be bent without adversely affecting performance. Use this probe for liquids and hot air or gases.

This high-quality penetration probe is designed for insertion into meats or food products in ovens, smokehouses or other cooking processes. Its rugged stainless steel handle provides a good grip for inserting or removing the probe and is often used by professionals who want a solid handle to grasp. The probe tip is swaged then sharpened for fast response and easy-insertion. The probe is provided with a 78" PTFE insulated cable, which can be closed in oven doors although you'll want to avoid flames or temperatures higher than 500°F. Longer cables available upon request.

The stainless steel shaft is open ended with a ventilation hole provided in the sides to expose the bare thermocouple sensor to the outside for faster measurements of air or gases. Ideal for environmental readings, cold storage or HVAC work.

These popular, general purpose, rigid stainless steel probes are suitable for a wide variety of temperature measurement or control applications. They are very inexpensive and can be used with handheld meters or permanently installed for long term monitoring. Available in 3/16" diameter (K-444) and 1/4" diameter (K-449). Includes 78" of flat PVC insulated cable. Order with bare lead termination for panel meters or controllers or a mini-connector for plugging in to a handheld meter. We can also make these to any custom length – just call us.

Rigid stainless steel sheath is flattened for insertion between packages of produce, frozen foods or other products. Slips easily between cartons or plastic bagged products. The tip is rounded to minimize accidental penetration of packaging materials.

Same size as the Heavy Duty T-Shape Probe but with a larger, reinforced shaft for even tougher use in frozen foods or asphalt construction work. This probe is almost unbreakable! The 1/4" diameter shaft reduces to 3/16" with a conical point for insertion.

The High Temp Industrial Probes go to very high temperatures and the stems are completely sealed against moisture. The mineral insulated sheath can be easily bent to any shape and is perfect for high temp ovens and furnaces, and are often used as long-term solutions to monitoring fireboxes and grill hoods. They can also be semi-permanently installed and will resist the weather and steam. The metal sheath section can go to 2,012°F! Available in two diameters, 1/16" (K-421) or 1/8" (K-426). The smaller diameter is faster and somewhat easier to bend. The larger diameter normally survives longer however, both should last for many years with modest care. Longer cables available upon request.

Great for fast measurements in foods, plastics, rubbers, etc… The 4" shaft is 1/16" all the way to the needle tip providing a small mass and fast response. Great for fish or other delicate foods.

The High Temp Industrial Probes go to very high temperatures and the stems are completely sealed against moisture. The mineral insulated sheath can be easily bent to any shape and is perfect for high temp ovens and furnaces, and are often used as long-term solutions to monitoring fireboxes and grill hoods. They can also be semi-permanently installed and will resist the weather and steam. The metal sheath section can go to 2,012°F! Available in two diameters, 1/16" (K-420) or 1/8" (K-425). The smaller diameter is faster and somewhat easier to bend. The larger diameter normally survives longer however, both should last for many years with modest care. Longer cables available upon request.

This easy to use surface probe features a 1/4" copper disc that is spring loaded and fit inside a stainless steel shaft. The shaft end is cut and bent into a tripod to aid in positioning the sensor flat against a surface. The wide range makes this probe useful in a wide variety of industrial uses.

Easy method to measure surface temperature permanently. The thermocouple sensing junction is located on a washer with a 1/4" diameter hole for bolting to the surface to be measured. Each probe is supplied with a 78" braided stainless steel cable for durability. Order with bare lead termination for panel meters or controllers or a mini-connector for plugging in to a handheld meter.

These popular, general purpose, rigid stainless steel probes are suitable for a wide variety of temperature measurement or control applications. They are very inexpensive and can be used with handheld meters or permanently installed for long term monitoring. Available in 3/16" diameter (K-444) and 1/4" diameter (K-449). Includes 78" of flat PVC insulated cable. Order with bare lead termination for panel meters or controllers or a mini-connector for plugging in to a handheld meter. We can also make these to any custom length – just call us.

Originally designed to measure milk shake temperatures in the fast food industry. Also ideal for other hot or cold beverages. Fits neatly into the straw hole of a cup lid. The disk at the top of the probe can be used as a stop to easily ensure measurement at a uniform depth.

This 5" general purpose probe is popular in the food industries and is a little more rugged than the Fast Response Probe. Great for reaching over hot grills, into large ovens, rotisseries or deep pots; also suitable for liquids and air temperatures. Great for testing meats in rotisseries, ovens or barbecue applications. With a 1/16" diameter sheath, this probe provides fast response times and the probe is a bit easier to bend for fitting into holes or between objects.